Quality control through thermal analysis, x-ray diffraction
Main Article Content
Abstract
In this paper, the results of the analysis of phases performed on lime samples for industrial purposes for the control of pH in leaching processes with the presence of cyanide are exposed, in order to control the content of calcium oxide in the samples. For this purpose it was necessary to determine the composition of qualitative and quantitative phases of the lime samples using the technique of Thermal Analysis, and the technique of X-ray Powder Diffractometry .The qualitative and quantitative analysis of the phases allowed to determine by Thermogravimetric Analysis (TG), through the calculation of the mass contents of the thermally active phases, the following qualitative composition: Calcium Hydroxide (Portlandite) and Calcium Carbonate (Calcite), they do not exhibit other phases as impurities, but the quantitative composition shows variability in the results.
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.
References
Betejtin A. 1970. Curso de Mineralogía, Moscú: Editorial MIR.
Casañas, X & Batista R. 2009. “Capítulo 10”. En Geología de Cuba Para Todos, La Habana, Cuba: Editorial Científico-Técnica, pp. 118-124.
Földvári M. 2011. Handbook of thermogravimetric system of minerals and ist use in geological practice, vol. 213, Budapest: Published by the Geological Institute of Hungary, pp. 671-288-4, 978-963-671-288-4.
González Arias A. 1985. Análisis térmico diferencial y otras técnicas termoanalíticas, La Habana, Cuba: Editorial Científico-Técnica.
Ivanova V.P, Kazatov V.K & otros.1974. Análisis térmico de rocas y minerales. URSS.
Klein, Cornelis; Huriburt, Cornelius S. Jr. & Aguilar Peris, José. 2018. Manual de Mineralogía. J. D. Dana. (eds), 4aed., España: Editorial Reverte,396 p., ISBN:9788429146073. Available: , [Consulted: May 19, 21].
Nemecz E. 1981. Clay Minerals, Budapest: Ed. Akadémiai Kiadó, ISBN: 963 05 19895
Torres Janneth; de Gutierrez, Ruby M; Castello, Ricardo & Vizcayno, Carmina. 2011. “Análisis comparativo de caolines de diferentes fuentes para la producción de metacaolín”. Revista Latinoamericana de Metalurgia y Materiales Vol.31(1):35-43, ISSN: 0255-6952 versión impresa.
Valmaseda Rojo, Lorena.2014. Desarrollo de un ensayo de lixiviación de dependencia de pH con control continuo para evaluar sedimentos contaminados. Tesis para acceder al Título de Ingeniero Técnico Industrial de la Especialidad en Química Industrial: Universidad de Cantabria, 75p., Available: <https://scholar.google.es>, [Consulted: August 27, 21].
Zambrano Arévalo, Alejandra M. 2015. Aproximación conceptual al análisis térmico y sus principales aplicaciones. Trabajo de Grado-Maestría: Universidad nacional de Colombia, Available: <https://repositorio.unal.edu.co/handle/unal/55271 >, [Consulted: July 19, 21].