Obtaining of the useful fraction of kaolin (kaolinite) for the study of their prosecution
Main Article Content
Abstract
In the Research Center for the Metallurgical Mining Industry (CIPIMM), a project is carried out to update and corroborate the results obtained in previous investigations, to implement kaolin treatment processes of the Santa Elena deposit in the Isla de la Juventud to obtain high quality products added value (AVA).The objective of the work is to evaluate at a laboratory scale the technical feasibility of separating the kaolinitic fraction from the kaolin through the levigation process with the equipment available in the (CIPIMM).A mineralogical and phase study of the supplied kaolin sample is presented to define the phase composition of the mineral under study. Experimental runs were performed in an elutriator at a laboratory scale, and for this, the speed of the water stream was determined to guarantee the efficient separation of the kaolinitic fraction, the mineral feed flow, the cut particle diameter, as well as the performance of the operation.It concludes with the corroboration of the obtained results and update of its processing to define the appropriate equipment and operating conditions for the economic evaluation with a view to the investment for the industrial implementation in the short term.
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.
References
Dianna SSP.JC. 2015. Caolín Available: <https://www.ecured.cu/Caolín >, [Consulted: 8 18, 2020].
Flores, S. 2009. Tecnología de clasificación fina de mineral metálico y no metálico. Revista de la Facultad de Ingeniería Industrial, Vol. 12, (No.1): 27-31.
Hernández, AN. & Rodríguez, T. 1985. Información sobre la prueba de planta piloto de las muestras de caolín del cuerpo 2 del yacimiento Dumañuecos. Informe de Investigación, La Habana: CIPIMM.
Mendes, de Freitas, JJ. 2010. Caracterización y estudio tecnológico del Estado de Bahía (Brasil) para la obtención de materiales cerámicos tradicionales. Tesis Doctoral, España: Universidad de Santiago de Compostela Instituto de Cerámica de Galicia Available: <https://www.scholar google.es >, [Consulted: 8 18, 2020].
Montejo, E. 2002. Manual de procedimientos análisis microgranulométrico mediante levigación. La Habana: Departamento de aprovechamiento de minerales del CIPIMM
Navarrete, C. & Hernández, AN. 1998. Tecnología para la producción de sulfato de aluminio a partir de materias primas caoliniticas cubanas. Informe de Investigación, La Habana: CIPIMM.
Osorio, A. 2009. Evaluación de un sistema de clasificación hidráulica para separación diferencial de mezclas sólidas. Ingeniería de investigación Vol. 29, (No.3).