Procedure for the analysis of gold cement of cuban plants
Main Article Content
Abstract
In gold production one of the most important intermediate products to control are gold cements. In this work an analytical method is proposed for the determination of Au, Ag, Cu, Pb and Zn in samples of gold cement of the plants that currently operate in our country and with it the following ranges of concentration are covered: Au- 20 to 20000 μg / g, Ag- 200 to 200000 μg / g, Cu- 0.01 to 10%, Pb- 0.02 to 20% and Zn- 0.04 to 40%. With the proposed method, the total digestion of the sample is guaranteed and the silver is kept in solution, for which a high concentration of hydrochloric acid (30%) is used. The final determination of the elements is carried out by Optical Emission Spectroscopy with Inductively Coupled Plasma, for which the sequential model of the SPECTRO FLAME MODULA equipment of the German branch SPECTRO was used, with radial observation form. For the evaluation of the precision a representative sample of this type of material was used, which was duly homogenized and used as part of the Quality Control of the Materials Characterization Department (DCM) of CIPIMM, obtaining the mean, the combined standard deviation, the uncertainty and the permissible differences for each range of values. The results obtained have made it possible to control these materials in the plants in operation in a satisfactory manner.
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.
References
Álvarez, A., Rodríguez, J. & Lamazares, J.L.1989. Determinación de impurezas en oro electrolítico obtenido a partir de soluciones ácidas por EAA con llamas. Informe de Investigación, No. 588, La Habana: CIPIMM.
Álvarez, A., Miranda, S. & Rodríguez, J.E. 2002. Certificación química del producto final de las plantas de oro (doré). Memorias Simposio de Metrología 2002, Querétaro: México, pp. 364-368.
Arias Lafargue Telvia, Fernández Compta, David, Sánchez Rodríguez, Yoleidi & Lasserra Portuondo, Aramis. 2017. “Influencia de la lixiviación en la recuperación de oro en la Mina Oro-Barita de Santiago de Cuba”. Tecnología Química, vol.37 (no.3), ISSN: 2224-6185, Available: <http://scielo.sld.cu/scielo.php?script=sci_arttext&pid=S2224-61852017000300008>, [Consulted: January 28, 2022].
Dixon & Massey. 1965. Introducción al Análisis Estadístico. 2nd ed., Cuba: Ediciones Revolucionarias, 408p.
General Guideline for Inductively Coupled Plasma Emission Spectrometry. 1996. ISO/CD 12235 1& 2.
IS 6890. 1975 Chemical Analyses of Dental Gold Alloys: Part II. - Determination of nickel and zinc.
IS 6890.1989. Chemical Analyses of Dental Gold Alloys. Part I. - Determination of gold, silver, palladium and platinum.
Slikers, K. 1993. The Automatic Atmic Emission Spectroscopy. Brühl Universitäts- drunkerei: Germany, ISBN 3980.3333-1-0
Spectroflame Modula. 1996. Operation Manual, Spectroanalytical Instruments GMNH: Germany.