TREATMENT OF CLAY MINERALS FROM THE NICKELIFEROUS DEPOSIT OF SAN FELIPE, THROUGH THE TECHNOLOGY OF DIRECT PULP PREPARATION
Main Article Content
Abstract
The oxidized nickel minerals from San Felipe deposit are formed by a high proportion of Smetites which give the clay nature of the pulp and give it very unfavorable rheological characteristics (cinematic viscosity and high shearing efforts) for the transportation processes (pumping), very low settling speeds and very low densifying thickness of pulps. These negative properties avoided the production of pulps with high % solids, which was unfavorable for the economic efficiency of the Project when applying the Acid Pressure Leaching Technology (HPAL) because pulps close to 30% solids were unachievable by any way. CIPIMM developed three technologies to overcome this problem and to substantially increase the % solids in pulp to be leached, which are:
- Direct preparation of pulps through additives (CIPIMM technology 2A). This proceeding takes advantage from the effect of some additives (inorganic salts) on the water-clay system) improving the pulps behavior. The use of this proceeding permits to increase the % solids in the final pulp to 40% with good rheological characteristics.
- The direct preparation of pulps through thermal treatment (Technology CIPIMM 2B). It is based on the irriversible thermal transformation of clays. Its use permits to obtain directly pulps with 50 – 60 % solids with excellent rheological characteristics. Besides, as a colateral effect, the nickel grade increases in 10 – 15%.
-The direct pulp preparation through chemical treatment (Technology CIPIMM 2C). This proceeding is based on the chemical transformation of clays, etc., to directly obtain an equivalent in pulps with 43- 45% solids, with excellent rheological characteristics.
The use of one technology or the other one depends on the chemical and mineralogical characteristics of the minerals to be treated, requiring the use of updated technical-economical evaluations to determine which one is the most convenient before higher scale tests.
- Direct preparation of pulps through additives (CIPIMM technology 2A). This proceeding takes advantage from the effect of some additives (inorganic salts) on the water-clay system) improving the pulps behavior. The use of this proceeding permits to increase the % solids in the final pulp to 40% with good rheological characteristics.
- The direct preparation of pulps through thermal treatment (Technology CIPIMM 2B). It is based on the irriversible thermal transformation of clays. Its use permits to obtain directly pulps with 50 – 60 % solids with excellent rheological characteristics. Besides, as a colateral effect, the nickel grade increases in 10 – 15%.
-The direct pulp preparation through chemical treatment (Technology CIPIMM 2C). This proceeding is based on the chemical transformation of clays, etc., to directly obtain an equivalent in pulps with 43- 45% solids, with excellent rheological characteristics.
The use of one technology or the other one depends on the chemical and mineralogical characteristics of the minerals to be treated, requiring the use of updated technical-economical evaluations to determine which one is the most convenient before higher scale tests.
Article Details
How to Cite
Montejo-Serrano, E. (2019) “TREATMENT OF CLAY MINERALS FROM THE NICKELIFEROUS DEPOSIT OF SAN FELIPE, THROUGH THE TECHNOLOGY OF DIRECT PULP PREPARATION”, INFOMIN, 5(2), pp. 96–113. Available at: https://www.infomin.edicionescervantes.com/index.php/i/article/view/45 (Accessed: 17 November 2026).
Section
Reseñas
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.