EFFLUENTS TREATMENT A PLANT IN CYANIDE HYDROMETALLURGICAL GOLD
Main Article Content
Abstract
Effluents from the process of extracting gold from cyanide not only contain free cyanide but also contain soluble cyanide complex form with different metals. These complexes do not have the same stability and therefore their toxicity and clearance in each of the cases is not the same. This fact makes the treatment of effluent cyanide process is a very complex process and the conditions found to effectively treat effluent are not necessarily the same that could be applied in other effluent. In this paper the application of different treatment options for the removal of cyanide and heavy metals from a waste effluent is studied from a gold hydrometallurgical plant. The alternative that reported the highest proved simultaneous addition of sodium hypochlorite as an oxidant and a soluble salt of iron followed by the addition of sulfuric acid to the clarified liquor and subsequent neutralization with lime pulp treated liquors end. With the proposed effluent decontamination procedure a high removal efficiency of total cyanides (99%) and metals (Ni, As, Cu) was achieved.
Article Details
How to Cite
Figueredo Frías, M. de los Ángeles (2019) “EFFLUENTS TREATMENT A PLANT IN CYANIDE HYDROMETALLURGICAL GOLD”, INFOMIN, 6(1), p. 21‐32. Available at: https://www.infomin.edicionescervantes.com/index.php/i/article/view/49 (Accessed: 17 November 2026).
Section
Artículos Originales
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.