EVALUATION OF THE MAIN INDEXES OF THE EXTRACTION OF NICKEL, COBALT AND IRON, TO LEAVE OF THE AMMONIA LINES OF STORED NICKEL
Main Article Content
Abstract
In this work, an investigation is carried out at laboratory scale in order to obtain alternative processing and recovery of nickel and cobalt contained in the ammonia lines and concentrate production of iron and chromium from the waste leaching steel for use purposes. Different leaching agents are studied in the process, the application of resin in pulp and beneficiation process waste concentrate to obtain iron and chromium Sulphurous acid (H2SO3 and SO2 + H2O) was effective for removing metals but very high consumption of bleaching agent (greater than 230kg / t tail) are required. Given the cost and environmental problems caused by the use of the bleaching agent it is not recommended for use.
The results obtained with H2SO4 are promising, with a dosage of 180 kg / t and% solid tail 40 to 46, there was an extraction of metals (43,7- 45,2)% Ni, (64 , 9 to 68.3)% Co and (14.3 to 14.8)% Fe. Studies separation of Ni and Co by queues resin leached pulp reported satisfactory results, achieving high adsorption efficiency (95.5% and 97.4% Co), resulting in increased recovery in the range 4.5% for Ni and 5.6% for Co, confirming the results reported in previous studies. Total metallurgical efficiency (lixiviation- adsorption-elution and precipitation of metals to sulfur) was: Ni 44.7% Co and 66.6% for a total consumption of acid (H 2SO4 187 kg / t, elution leaching + resin), which is considerably acceptable for the low nickel content of the queues (0.37% Ni).
As a result of the benefit of leachate waste, laboratory tests and there was a bank iron concentrate with 53-54% Fe, with the recovery of this metal of 58.6%. Overall recovery of iron from the initial tail was 57.7% by weight Fe and the weight yield of concentrate was 47%.Technology for processing queues Caron process that achieves acceptable rates of use of the metals contained in the proposed ammonia tails.
Article Details
Those authors who have publications with this journal accept the following terms:
- The authors will retain their copyright and guarantee the magazine the right to first publish their work, which will be simultaneously subject to the Creative Commons 4.0 Recognition-NonCommercial Recognition License that allows third parties to share the work whenever it is indicate its author and its first publication this magazine. Under this license the author will be free from:
- Share - copy and redistribute the material in any medium or format
- Adapt - remix, transform and create from the material
- The licensor cannot revoke these freedoms while complying with the terms of the license
Under the following conditions:
- Recognition - You must properly recognize the authorship, provide a link to the license and indicate if changes have been made. You can do it in any reasonable way, but not in a way that suggests that you have the support of the licensor or receive it for the use you make.
- NonCommercial - You may not use the material for a commercial purpose.
- There are no additional restrictions - You cannot apply legal terms or technological measures that legally restrict what the license allows.
- Authors may adopt other non-exclusive licensing agreements for the distribution of the version of the published work (e.g., deposit it in an institutional telematic archive or publish it in a monographic volume) provided that the initial publication in this journal is indicated.
- Authors are allowed and recommended to disseminate their work through the Internet (e.g., in institutional telematic archives or on their website) before and during the submission process, which can produce interesting exchanges and increase citations. of the published work. (See The effect of open access).
The magazine is not responsible for the opinions and concepts issued in the works, they are the sole responsibility of the authors. The Editor, with the assistance of the Editorial Committee, reserves the right to suggest or request advisable or necessary modifications. The mention of trademarks of specific equipment, instruments or materials is due to identification purposes, there being no promotional commitment in relation to them, neither by the authors nor by the publisher.